Makita 18V 2 Piece BRUSHLESS Combo Kit DLX2308G

by Makita
$719.00
SKU DLX2308G

Makita 18V Brushless 2 Piece 6.0Ah Combo DLX2308G
Bonus Via Redemption until 31 January 2020 - Makita 18V LED Worklight (240V or 18V Battery) DML805
For redemption go to https://www.makita.com.au/promotions
Makita 18v Li-ion Brushless Hammer Drill DHP481Z
Features:
Single sleeve keyless chuck
Wider torque range of 1 - 10 Nm in clutch mode allows for versatile applications
Mode ring selection
Mechanical 2 speed gearing
Long rigid side grip helps to stabilize the bit for steady drilling/screwdriving
All metal gear construction
Twin LED job light with after-glow function
Battery fuel gauge shows power remaining in battery
Single sleeve keyless chuck allows for easy bit installation, removal by one hand
High performance Brushless DC motor. Produces more work amount on a single battery charge while also being durable against long continuous operation
Extreme Protection Technology with enhanced dust and drip resistant performance
Specifications:
Impacts Per Minute - Hi 0-31,500 ipm
Impacts Per Minute - Lo 0-8,250 ipm
Max Fastening Torque - Hard 115 Nm
Max Fastening Torque - Soft 60 Nm
Net Weight 2.7 kg
No Load Speed - Hi 0-2,100 rpm
No Load Speed - Lo 0-550 rpm
Overall Length 205 mm
Capacity - Masonry 16 mm
Capacity - Steel 13 mm
Capacity - Wood 76 mm
Voltage 18V
Makita 18V Brushless 4-Stage Impact Driver DTD171Z
Features:
Enhanced anvil holder - material change from needle bearing to ball bearing provides more stability when using longer bits
Quick switch function - the quick switch button allows the user to rapidly switch between the 4 stage impact selection or 2 pre-set function modes
Multi function control panel - control panel displays 4-stage impact selection as well as 4 mode functions. Assist mode, reverse rotation mode and Tek screw mode 1 and 2
Brushless motor - powerful and compact the BL44 produces high power in a compact design ideal for rapid stop and start applications normally undertaken by impact drivers
Left and right twin LED - twin LED job lights have been repositioned onto the left and right of the housing providing a brighter wider light. The LED light can also manually be turned on and off from the multifunction panel
Variable speed trigger - as well as the multi speed control panel the user can optimise the speed of the impact driver via the trigger
XPT - eXtreme Protection Technology - enhances dust and drip resistant performance for use in outdoor applications or harsh environments
Specifications:
Voltage 18V
Max capabilities - standard bolt M5-M16
Max capabilities - high tensile bolt M5-M14
No Load Speed Max: 0 - 3600 rpm
Hard: 0 - 3200 rpm
Med 0 - 2100 rpm
Soft: 0 - 1100 rpm
Impact Rate Max: 0 - 3800 ipm
Hard: 0 - 3600 ipm
Med 0 - 2600 ipm
Soft: 0 - 1100 ipm
Max tightening torque 180 Nm
Drive shank 6.35 mm (1/4" Hex)
Overall Length 116 mm
Tool weight 1.0 kg
Makita 18V 6.0Ah Lithium Battery with Charge Indicator BL1860B-L
Features:
Introducing a NEW 6.0Ah battery with fuel indicator for increased endurance
Star Protection
Battery Fuel Gauge
Multi-contact slide type terminal
Protective gel coating
Active 3 Controls current, voltage and thermal temperature
Shock absorbing construction
The fastest charge times in the industry
Intelligent battery & charger communication system
Protective gel coating - Sensitive electronics are protected with a thick gel coating, preventing damage against dust & moisture.
Shock absorbing construction - Battery cells are protected in an internal bumper case with foam pads at the base to protect against shock.
Multi-contact slide terminal - Ensures stable contact with the tool even under extreme vibration.
Overload Protection - The battery and tool communicate, protecting your tool and battery from overload by cutting power when put under abnormally high current draw.
Over-discharge Protection - Monitors battery charge capacity and cuts power to protect battery cells.
Over heat protection - Extreme heat damages ALL batteries. If the battery reaches a certain level of heat it will cut power to the tool.
Up 100% more run time than BL1830*
4-Stage battery fuel indicator
60 minute charge time
Specifications:
Voltage 18V
Dimensions LxWxH (cm) 11 x 8 x 6.5
Weight 0.66 Kg
Makita Active 7.2-18V Li-Ion Rapid Charger DC18RC 195589-2
Features:
Fast charging - charges Li-Ion 3.0Ah battery in only 22 minutes
Built-in CPU - gathers information from the battery's memory chip to determine optimum charging method
Forced air cooling fan - cools the battery to minimise charging time
Digital power display identifies the condition of the battery and charging condition
Specifications:
Cell Capacity 1.5-5.0 Ah
Charge Time 15 mins (1.5 Ah) 22 mins (3.0 Ah) 36 mins (4.0 Ah) 45 mins (5.0 Ah)
Net Weight 820 g
Overall Length 185 mm
Voltage 18 V

You recently viewed

Clear recently viewed