Makita DLX3162TJ 18V 5.0Ah LXT Li-ion Cordless Brushless 3pce Combo Kit

Makita DTD172Z 18V Li-ion Cordless Brushless 4-Stage Impact Driver - Skin Only

Makita has a tradition of innovation in the cordless impact driver  category, and the 18V LXT Brushless 4-Speed Impact Driver (DTD172)  sets new standards. The DTD172 offers users four speeds, as well as  Makita’s exclusive application modes for increased fastening control.  The unique application models use the brushless motor’s electronic  controls to find the best balance of speed and torque for each  application for more efficient fastening. Another precision setting is  Tightening Mode (T-mode), which downshifts and reduces rotation and  impact speed prior to driving the screw into place, and is engineered to  minimize screw thread stripping, screw breakage and damage to work.  The DTD172 delivers industry-leading performance in a compact and  ergonomic design.

Added features include the one-touch 4-speed power selector button  under the chuck, which enables one-handed speed changes, and  reverse rotation auto-stop mode which stops rotation and impact  when the fastener is loosened adequately to help prevent overloosening and dropped fasteners.

Features:

• Slim Tool Body with a re-designed head that is slimmer than the previous  model enabling the tool to have greater access to tight corners or confided spaces
• One Touch Bit Installation has been designed to prevent  the bit from unexpectedly falling off. A more effective mechanism has been  designed increasing the strength of the chuck with out increasing the resistance  required to install a bit
• Enhanced Anvil Holder; material change from needle bearing to ball bearing  provides reduction of bit wobbling. Providing more stability and control when  fastening
• Quick Change Selector; one touch mode selector located above the trigger  allows the user to jump between modes single handed. Quickly changing between  modes improves efficiency as you no longer have to take your hand off the tool
• Light Mode enables the tool to be used as a torch in dark environments. To turn  the light on set the F/R change lever to the neutral position and pull the switch  trigger. To turn off the light pull the trigger again
• 4 Optimised Application Modes; T-mode 1 and 2 for  self drilling screws in both thick and thin sheet metal. Wood mode for fastening  long wood screws. Bolt mode with rotation auto stop for tightening / loosening  bolts
• 4-Speed Power Selection allow the user to adjust the  power, speed and impact rate to suit the fastening application

Specifications:

• Voltage: 18V
• Drive shank: 6.35mm (1/4") Hex
• Max tightening torque:
  • Max: 180Nm
  • Hard: 170Nm
  • Med: 50Nm
  • Soft: 20Nm
• No load speed:
• Max: 0 - 3600rpm
• Hard: 0 - 3200rpm
• Med: 0 - 2100rpm
• Soft: 0 - 1100rpm
• Impact rate:
• Max: 0 - 3800ipm
• Hard: 0 - 3600ipm
• Med: 0 - 2600ipm
• Soft: 0 - 1100ipm
• Max capacity:
• Standard bolt: M5 - M16
• High tensile bolt: M5 - M14
• Length: 114mm
• Weight: 0.9kg

Warranty:

• 3 Years Warranty Covered By Makita Australia

Makita DRT50Z 18V Li-ion Cordless Brushless Laminate Trimmer Router - Skin Only

Introducing Makita's first Cordless Brushless Laminate Trimmer, DRT50Z, featuring the same style base form factor as the electric compact router, RT0701C. With a variable speed control dial, a power button and a lock/unlock button to prevent unintentional activation during transporting, it gives all tradesman a handy cordless version of Makita's excellent routers that is easy to use for any job on site.

Makita's High performance Brushless DC motor produces more work amount on a single battery charge while also being durable against long continuous operation. The DRT50Z is backed by Makita Australia's 3 Year Cordless Tool Warranty.

You can pre order the DRT50 today to ensure you receive first delivery at Sydney Tools.

Includes:

• 1 x 1/4" Collet
• 1 x 3/8" Collet
• 1 x Template guide
• 2 x Wrenches (13mm & 22mm)
• 1 x Straight guide
• 1 x Dust nozzle
• 1 x Laminate trimmer base

Features:

• On / Off Button with lock prevents accidental start up of the tool during use or transport, protecting the user and the workpiece
• Shaft lock easy installation and removal of trimmer bit with single wrench by pressing the shaft lock
• Soft start minimises start up shock and makes the tool start smoothly for optimum control
• BL Brushless Motor provides more power to the motor whilst increasing runtime and durability
• Variable speed control dial the rotation speed of the tool can be changed from 10,000 - 30,000rpm by turning the speed adjusting dial
• Constant speed control provides constant rotation speed regardless of load conditions
• RT0700C accessories are compatible which include; trimmer base, plunge routing base, tilt base and offset base assembly

Specifications:

• Voltage: 18V
• Collet: 6.35mm (1/4”)
• No load speed: 10,000 – 30,000rpm
• Height: 226mm
• Weight 1.4kg

Warranty:

• 3 Years Warranty Covered By Makita Australia

Makita DKP181Z 18V Li-ion Cordless Brushless AWS Planer - Skin Only

Makita BL1850B-L 18V 5.0Ah Li-ion Cordless Battery with Gauge

The Makita 18V LXT Li-ion 5.0Ah battery, BL1850B-L, charges faster and works longer than standard Li-ion batteries, giving you and your cordless tools unmatched performance and productivity to take on the most demanding applications.

The Makita 5.0Ah battery combines more run time (66% more run time per charge than the Makita BL1830 3.0Ah battery) with a category-leading charge time of only 45 minutes, so it spends more time working and less time sitting on the charger. For added convenience, it also features an L.E.D. charge level indicator to monitor battery charge. The BL1850B-L resists self-discharge so it is ready for use even after long periods of little to no useage.

Features:

• Integrated L.E.D. battery charge level indicator allows user to monitor battery charge
• Up to 66% more run time per charge compared to BL1830
• Fast 45 minute charging time
• Battery delivers consistent power and run time in extreme temperatures, even in winter (-20°C)
• Impact-resistant outer case and shock-absorbing inner-liner are engineered to protect the battery
• Sixteen contact terminals maintain a constant connection with the tool to help prevent power loss or fluctuation, even during high-vibration applications
• Battery resists self-discharge and remains ready for use even after long periods of storage
• Sensitive electronics are protected with a thick gel coating, preventing damage against dust and moisture
• Star protection computer controls - includes overload protection, over-discharge protection and over heat protection
• The battery and tool communicate, protecting your tool and battery from overload by cutting power when put under abnormally high current draw
• If the battery reaches a certain level of heat it will cut power to the tool, protecting the tool and battery from overheating

Specifications:

• Voltage: 18V
• Amp hour: 5.0Ah
• Cell type: Lithium-Ion
• Charging time: 45 minutes
• Weight: 0.6kg

Warranty:

• 2 Years Warranty covered by Makita

Makita DC18RC (195589-2) 18V Li-Ion Cordless Battery Fast Charger

Features:

• Built-in CPU - gathers information from the battery's memory chip to determine optimum charging method
• Forced air cooling fan - cools the battery to minimise charging time
• Digital power display identifies the condition of the battery and charging condition

Specifications:

• Voltage: 18V
• Cell capacity: 1.5Ah - 6.0Ah
• Charge Time: 
• 1.5Ah: 15mins
• 3.0Ah: 22mins
• 4.0Ah: 36mins
• 5.0Ah: 45mins
• 6.0Ah: 55mins
• Length: 185mm
• Weight: 0.82kg

Warranty:

• 2 Years Warranty Covered By Makita

Makita 197053-9 (821552-6) Makpac Connector Carry Case System - Type 4

The Makita MAKPAC connector case system designed for the professional. Strong and collapsible carry handles make the connector cases easy to move and store. Rounded grips make it easy to remove the individual cases. The MAKPAC connector case system consists of four cases varying in height. The cases can be stacked on top of each other and locked together with the locking latches. The interconnected cases take up less storage space and are easy to transport to and from the work site.

Features:

• Stackable for storage and easy transportation
• Strong and collapsible handles
• Four different sizes to choose from

To suit:

• Makita 5008MG 1800W 210mm (8-1/4") Circular Saw
• Makita BHR242/DHR242 18V Li-Ion SDS Plus Brushless Rotary Hammer Drill
• Makita BHR243/DHR243 18V Li-ion Cordless Brushless SDS Plus Rotary Hammer
• Makita BHR262 18V Li-Ion SDS Plus Brushless Rotary Hammer Drill
• Makita HR262T 36V Li-Ion Rotary Hammer Drill
• Makita RP1800 1850W 12mm (1/2") Plunge Router
• Makita RP2301FC 2100W 12mm Plunge Router
• Makita RT0700C 710W 6.35mm (1/4") Router
• Makita SP6000 1300W 165mm (6-1/2") Plunge Cut Circular Saw

Specifications:

• Type: 4
• Dimensions (L x W x H): 395mm x 295mm x 315mm
• Weight: 2.3kg