Skip to content
Makita DTR181RTX1 18V 5.0Ah LXT Li-ion Cordless Brushless 0.8mm Large Diameter Rebar Tying Tool Combo Kit

Makita DTR181RTX1 18V 5.0Ah LXT Li-ion Cordless Brushless 0.8mm Large Diameter Rebar Tying Tool Combo Kit

by Makita
$2,699.00
SKU DTR181RTX1

Makita has delivered a cordless tying solution for rebar and steel rod with the 18V LXT Brushless Rebar Tying Tool (DTR181). The DTR181 has a tying capacity of up to 5,000 ties of 16mm x 16mm diameter rebar on with a 6.0Ah battery (battery sold separately). Tie multiple bars in under one second. The DTR181 can tie up to a 24mm x 20mm bar or 28mm x 16mm or combination of four bars 2x 16mm & 2x 12mm

The 18V LXT Brushless Rebar Tying Tool features 2 modes of operation, single or continuous, and a Brushless Motor that runs cooler and more efficiently for a longer life than standard motors. Digitally adjust the tying strength to match various tension strength requirements. The DTR181 features an easy-load wire reel design with an automatic locking mechanism built into the protective cover.

Includes:

  • 5 x Rolls Tire Wire
  • 1 x Belt Hook
  • 1 x 2.5mm Hex Wrench
  • 1 x Nylon Brush
  • 1 x Plastic Case

Features:

  • Applicable rebar size: 20x24mm or 16x28mm
  • Automatically ties rebar in a rapid single motion
  • 2-mode operation single or continuous wire tie actuation for fast tying
  • 6-Stage digital adjustment of tying strength to match various tension strength requirements
  • XPT – for enhanced protection against dust and moisture

Specifications:

  • Voltage: 18V
  • Tie wire: 0.8mm
  • Max Appliciable bars: 24mm x 20mm / 28mm x 16mm 
  • Length: 317mm
  • Weight: 2.1kg

Warranty:

  • 3 Years Warranty Covered By Makita Australia



Makita BL1860B-L 18V 6.0Ah Li-ion Cordless Battery with Gauge

The Makita 18V LXT Li-ion 6.0Ah battery, BL1860B-L, charges faster and works longer than standard Li-ion batteries, giving you and your cordless tools unmatched performance and productivity to take on the most demanding applications.

The Makita 6.0Ah battery combines more run time (100% more run time per charge than the Makita BL1830 3.0Ah battery) with a category-leading charge time of only 60 minutes, so it spends more time working and less time sitting on the charger. For added convenience, it also features an L.E.D. charge level indicator to monitor battery charge. The BL1860B-L resists self-discharge so it is ready for use even after long periods of little to no useage.

Features:

  • Integrated L.E.D. battery charge level indicator allows user to monitor battery charge
  • Up to 100% more run time per charge compared to BL1830
  • Fast 60 minute charging time
  • Battery delivers consistent power and run time in extreme temperatures, even in winter (-20°C)
  • Impact-resistant outer case and shock-absorbing inner-liner are engineered to protect the battery
  • Sixteen contact terminals maintain a constant connection with the tool to help prevent power loss or fluctuation, even during high-vibration applications
  • Battery resists self-discharge and remains ready for use even after long periods of storage
  • Sensitive electronics are protected with a thick gel coating, preventing damage against dust and moisture
  • Star protection computer controls - includes overload protection, over-discharge protection and over heat protection
  • The battery and tool communicate, protecting your tool and battery from overload by cutting power when put under abnormally high current draw
  • If the battery reaches a certain level of heat it will cut power to the tool, protecting the tool and battery from overheating

Specifications:

  • Voltage: 18V
  • Amp hour: 6.0Ah
  • Cell type: Lithium-Ion
  • Charging time: 60 minutes
  • Weight: 0.6kg



Makita DC18RC (195589-2) 18V Li-Ion Cordless Battery Fast Charger

Features:

  • Built-in CPU - gathers information from the battery's memory chip to determine optimum charging method
  • Forced air cooling fan - cools the battery to minimise charging time
  • Digital power display identifies the condition of the battery and charging condition

Specifications:

  • Voltage: 18V
  • Cell capacity: 1.5Ah - 6.0Ah
  • Charge Time: 
    • 1.5Ah: 15mins
    • 3.0Ah: 22mins
    • 4.0Ah: 36mins
    • 5.0Ah: 45mins
    • 6.0Ah: 55mins
  • Length: 185mm
  • Weight: 0.82kg

Warranty:

  • 2 Years Warranty Covered By Makita Australia