Makita 18V 2 Piece BRUSHLESS Combo Kit DLX2233TJ

by Makita

Makita 18V 2 Piece Brushless Combo DLX2233TJ


01/07/2020 - 30/09/2020
*Full T&Cs apply

Makita 18V Mobile Brushless 1/2" Impact Wrench DTW1002Z

Designed to suit the needs of structural steel tradesmen, heavy mechanics, riggers as well as anyone that needs to fasten material between 400 and 1,050 Nm
Develop a mobile brushless impact wrench that has 1,050 fastening torque, that is also extremely compact and lightweight
Rubber bumper -designed to protect the work piece from damage and insulate the heat from the motor
LED job light -twin LED job light with pre glow and afterglow functions
3 stage impact selection -3 stage impact power can be selected depending on the material of the workpiece or bolt type.
Variable speed control -as well as having 3 stage impact selection user also has control over the speed on the trigger
BL Brushless Motor -provides more power and longer run times then normal brushed designs
Electric brake -driving shank quickly brakes upon release of the trigger, enabling the user to have more control over the tool
Rubber joint construction -suppresses the transmission of vibration to battery terminals. Minimising battery failures such as terminal breakage or poor contact
Sky hook -large hook 45mm wide for hanging on guard rails or scaffolding
Impacts per minute: ipm High 2,200
Med 2,000
Low 1,800
No load speed: rpm High 1,800
Med 1,000
Low 900
Tightening torque: Nm. High 1,000
Med 500
Low 300
Nut busting torque: Nm. 1,600

Makita 18V Mobile Brushless 1/2" Impact Wrench DTW285Z

280 Nm of max fastening torque in one hand
1/2" square drive friction ring
3 stage power selection
Reverse rotation auto stop mode loosens the bolt and then stops for safe operation
xPT technology that protects against dust and moisture
Drive Shank 1/2" square drive friction ring
Impact Rate: Hard 0-3,500 ipm
Impact Rate: Medium 0-2,600 ipm
Impact Rate: Soft 0-1,800 ipm
Max Fastening Torque 280 Nm
Net Weight 1.7kg w/ BL1860B
No Load Speed: Hard 0-2,800 rpm
No Load Speed: Medium 0-2,100 rpm
No Load Speed: Soft 0-1,600 rpm
Capacity - High Tensile Bolt M10-M16
Capacity - Standard Bolt M10-M20

Makita 5.0Ah Lithium Battery with Charge Indicator BL1850B-L
Star Protection
Battery Fuel Gauge
Multi-contact slide type terminal
Protective gel coating
Active 3 Controls current, voltage and thermal temperature
Shock absorbing construction
The fastest charge times in the industry
Intelligent battery & charger communication system
Protective gel coating - Sensitive electronics are protected with a thick gel coating, preventing damage against dust & moisture.
Shock absorbing construction - Battery cells are protected in an internal bumper case with foam pads at the base to protect against shock.
Multi-contact slide terminal - Ensures stable contact with the tool even under extreme vibration.
Overload Protection - The battery and tool communicate, protecting your tool and battery from overload by cutting power when put under abnormally high current draw.
Over-discharge Protection - Monitors battery charge capacity and cuts power to protect battery cells.
Over heat protection - Extreme heat damages ALL batteries. If the battery reaches a certain level of heat it will cut power to the tool.
Up 66% more run time than BL1830*
4-Stage battery fuel indicator
45 minute charge time
Voltage 18V
Dimensions LxWxH 11 x 8 x 6.5 cm
Weight 0.63 Kg

Makita DC18RC Active 3 Li-Ion Charger
Fast charging - charges Li-Ion 3.0Ah battery in only 22 minutes
Built-in CPU - gathers information from the battery's memory chip to determine optimum charging method
Forced air cooling fan - cools the battery to minimise charging time
Digital power display identifies the condition of the battery and charging condition
Cell Capacity 1.5-5.0 Ah
Charge Time 15 mins (1.5 Ah) 22 mins (3.0 Ah) 36 mins (4.0 Ah) 45 mins (5.0 Ah)
Net Weight 820 g
Overall Length 185 mm
Voltage 18 V

You recently viewed

Clear recently viewed