Festool KA 65 CONTURO perfect edge assembly set KA 65-Plus Perfect Edge Set
Festool KA 65 Conturo Edge Bander Perfect Edge Set 574874
Festool Edge Bander KA 65 Plus
The Conturo makes it easy to apply edges to bends, radises, convex and concave forms. Even mitre edges can be finished in perfect quality using the bench unit. Suitable for machining all types of wood, plastic or melamine edging with a height of 18 mm to 65 mm and edge thickness of 0.5 mm to 3.0 mm (depending on material), work with the Conturo is quick, easy and clean. Packed in a systainer, the Conturo is also extremely mobile and together with the system accessories, it provides the perfect edge quality wherever you take it.
Safe thermal unit - The thermally isolated gluing unit ensures short heating times (approximately 8 minutes) and maintains low surface temperatures - no risk of burns.
Free temperature control - Two pre programmed temperatures (others can be programmed as required) allow the use of different glues.
Clean gluing system - The cartridge glue system ensures efficient and clean work as well as fast colour changes. Glue is melted as required meaning no overheating, discolouring or loss of quality.
Perfect ergonomics - The contact roller gives better transfer of force along handles. Fixed edge guide transmits force to top of work piece edge regardless of the edging height, with direct view of the contact roller.
Practical display - Display provides information on the glue quantity and reserves, set point, actual temperature and operating information. It indicates how many metres of edging can be processed with current setting.
Stationary application - Affixing edging to mitred surfaces (0 to 47 degrees) and small pieces is also possible, simply by inserting an adapter plate in the workbench with a perforated top.
Motor Type Brushed
Power Source Corded
Power Consumption 1,200 W
Power Lead Type Fixed Lead
Edge Height 18 mm - 65 mm
Edge Thickness 0.5 mm - 3 mm
Inner Radius > 50 mm
Heating Time 8 minutes
Melting Temperature 100Â° - 210Â°
Feed Rate 2 metres every 4 minutes
Tool Weight 7.9 kg
KA 65 Conturo Trimmer Systainer Set
Systainer set with accessories for KA 65 Edge Bander.
Base runner scratch protector with 3x felt pads
5x Polishing felt
20x Abrasive sheets StickFix Brilliant 80x133 P320
Hand sanding block 80x133 mm
5x StickFix sanding cloth 800
Polish MPA 6000
MFK 700 EQ Laminate Trimmer Plus
The MFK trimmer is one of the most cost effective tools money can buy. Simply change the router base, rather than reaching for a different tool and you will be equipped to handle any tasks involving edges and corners. Attach the appropriate base in a few simple steps and straightaway you're ready to trim veneers or rout grooves, round over edges, create edge profiles and more. Use the parallel side fence to create perfect rebates and corners with ease. The dust extraction component is designed to accommodate any application, the MFK 700 extracts dust and chips directly from the base which allows for the hose to stay out of your way.
Cost effective - The integrated adapter interface can be used to interchange different router bases without tools. The router base is inclined 1.5 degree for safe routing of laminate without marking the work piece.
Perfectly adjustable - Whether you are fine tuning the routing depth to 1/10 mm, or matching the tool speed to material through electronic speed control, the MFK can be precisely adjusted to meet your needs.
Parallel side fence - The adjustable stops of the parallel side fence are optimally adjusted to the cutter, preventing tilting. This makes it easy to create perfect rebates and corners.
Moving contact - The moving contact pad with external ball bearing is utilised on curved edges to exploit the full potential of the cutter blade and ensure streak free trimming results.
The zero degree base plate - Veneer on covered or coated work pieces must be routed at an exact right angle to the surface. A zero degree router table is available for this type of task to guarantee a secure glued joint.
A complete system - When used with a Festool Dust Extractor, the MFK 700 extracts chips and dust directly from the base. The hose stays out of your way to keep your workplace and lungs dust free.
Motor Type Brushed
Power Source Corded
Power Consumption 720 W
No Load Speed 10,000 rpm - 26,000 rpm
Power Lead Type Plugit Lead
Collet Diameter 6 mm - 8 mm
Routing Width 32 mm
Fine Height Adjustment Range 14 mm
Connection Diameter for Dust Extraction 27 mm
Tool Weight 1.9 kg