Makita 18V Caulking Gun & Multi Tool 5.0Ah Combo DLX2352TX1

by Makita
$629.00
SKU DLX2352TX1

Makita 18V 600ml Sausage Caulking Gun DCG180ZB
Features:
Light, compact design
360° rotating sealant holder - This design feature enables the operator to efficiently caulk in those hard to reach places by simply rotating the sealant holder so that the angle of the cartridge nozzle covers the gap in need of caulk
Variable speed control via dial and trigger switch for optimum control of sealant flow rate: 1) Speed control dial - Enables the user to set pushing speed for perfect sealant flow rate to match the material of the workpiece or the width of the gap to in need of caulk. 2) Variable speed trigger switch - This feature allows for fine adjustment of the pushing speed for a controlled sealant flow rate from the start point and around the corner
LED job light complete with handy pre-glow and afterglow functions
Overload Indication Lamp; single LED light notifies user of potential overload to avoid breakage of the sealant cartridge as follows: Blinking - The device is nearing overload Solid - The device is overloaded; the overload circuit will disable power
Rubberised soft grip handle offers user-friendly comfort and ease of control
Anti-drip Function eliminates excess sealant from oozing out upon release of the trigger by lessening the residual pressure inside of sealant cartridge holder
Piston for bulk sealant can additionally be used as a suction plunger to pump sealant into the 600ml size holder from the bulk container (DCG180ZB only)
Specifications:
Model (#) DCG180ZB
Battery Cell Li-ion (not included)
Battery Voltage (v) 18V (not included)
Battery Capacity (Ah) 1.3/3.0Ah (not included)
Cartridge Size (ml) 600ml
Max Pushing Force (N) 5,000N
No Load Speed (mm) 0-28mm/SEC²td>
Compatible Sealant Size (mm) 51.0mm x 355mm
Compatible Sealant Type Cartridge, Sausage Pack, Bulk Sealant
Trigger Lock Yes
Barcode - 0088381641364
Dimensions (mm) 659x108x281mm (LxWxH)
Weight (kg) 2.7KG
Makita 18V Multi Tool DTM50Z
Features:
On tool hex wrench for accessory changes
Compatible with a wide range of accessories
6,000 - 20,000opm no load speed for versatile performance
12 angle settings of accessories at every 30° from 0° to 360°
Anti-restart function
Specifications:
Head Height 88 mm
Oscillation Angle (degree) 1.6 (3.2 Total)
Oscillations Per Minute 6,000 - 20,000
Overall Length 324 mm
Vibration m/s² 10
Voltage 18V
Makita 5.0Ah Lithium Battery with Charge Indicator BL1850B-L
Features:
Star Protection
Battery Fuel Gauge
Multi-contact slide type terminal
Protective gel coating
Active 3 Controls current, voltage and thermal temperature
Shock absorbing construction
The fastest charge times in the industry
Intelligent battery & charger communication system
Protective gel coating - Sensitive electronics are protected with a thick gel coating, preventing damage against dust & moisture.
Shock absorbing construction - Battery cells are protected in an internal bumper case with foam pads at the base to protect against shock.
Multi-contact slide terminal - Ensures stable contact with the tool even under extreme vibration.
Overload Protection - The battery and tool communicate, protecting your tool and battery from overload by cutting power when put under abnormally high current draw.
Over-discharge Protection - Monitors battery charge capacity and cuts power to protect battery cells.
Over heat protection - Extreme heat damages ALL batteries. If the battery reaches a certain level of heat it will cut power to the tool.
Up 66% more run time than BL1830*
4-Stage battery fuel indicator
45 minute charge time
Specifications:
Voltage 18V
Dimensions LxWxH 11 x 8 x 6.5 cm
Weight 0.63 Kg
Makita 18V 1 Hour Charger DC18SD
Features:
Digital power display indicates charging level
More cost effective option
Optimum charging system to maximise cycle life and work volume
Specifications:
Cell Capacity 1.5-3.0 Ah
Charge Time 30 mins (Compact)
60 mins (3.0 Ah)
Net Weight 700 g
Overall Length 151 mm
Voltage DC 7.2-18V

You recently viewed

Clear recently viewed