Makita 18V Brushless 4-Stage Impact Driver 5.0Ah Set DTD171RTJ

by Makita
$599.00
SKU DTD171RTJ

Features:
Enhanced anvil holder - material change from needle bearing to ball bearing provides more stability when using longer bits
Quick switch function - the quick switch button allows the user to rapidly switch between the 4 stage impact selection or 2 pre-set function modes
Multi function control panel - control panel displays 4-stage impact selection as well as 4 mode functions. Assist mode, reverse rotation mode and Tek screw mode 1 and 2
Brushless motor - powerful and compact the BL44 produces high power in a compact design ideal for rapid stop and start applications normally undertaken by impact drivers
Left and right twin LED - twin LED job lights have been repositioned onto the left and right of the housing providing a brighter wider light. The LED light can also manually be turned on and off from the multifunction panel
Variable speed trigger - as well as the multi speed control panel the user can optimise the speed of the impact driver via the trigger
XPT - eXtreme Protection Technology - enhances dust and drip resistant performance for use in outdoor applications or harsh environments
Specifications:
Voltage 18V
Max capabilities - standard bolt M5-M16
Max capabilities - high tensile bolt M5-M14
No Load Speed Max: 0 - 3600 rpm
Hard: 0 - 3200 rpm
Med 0 - 2100 rpm
Soft: 0 - 1100 rpm
Impact Rate Max: 0 - 3800 ipm
Hard: 0 - 3600 ipm
Med 0 - 2600 ipm
Soft: 0 - 1100 ipm
Max tightening torque 180 Nm
Drive shank 6.35 mm (1/4" Hex)
Overall Length 116 mm
Tool weight 1.0 kg
Makita Active 3 Li-Ion Rapid Charger DC18RC
Features:
Fast charging - charges Li-Ion 3.0Ah battery in only 22 minutes
Built-in CPU - gathers information from the battery's memory chip to determine optimum charging method
Forced air cooling fan - cools the battery to minimise charging time
Digital power display identifies the condition of the battery and charging condition
Specifications:
Cell Capacity 1.5-5.0 Ah
Charge Time 15 mins (1.5 Ah) 22 mins (3.0 Ah) 36 mins (4.0 Ah) 45 mins (5.0 Ah)
Net Weight 820 g
Overall Length 185 mm
Voltage 18 V
Makita 5.0Ah Lithium Battery with Charge Indicator BL1850B-L
Features:
Star Protection
Battery Fuel Gauge
Multi-contact slide type terminal
Protective gel coating
Active 3 Controls current, voltage and thermal temperature
Shock absorbing construction
The fastest charge times in the industry
Intelligent battery & charger communication system
Protective gel coating - Sensitive electronics are protected with a thick gel coating, preventing damage against dust & moisture.
Shock absorbing construction - Battery cells are protected in an internal bumper case with foam pads at the base to protect against shock.
Multi-contact slide terminal - Ensures stable contact with the tool even under extreme vibration.
Overload Protection - The battery and tool communicate, protecting your tool and battery from overload by cutting power when put under abnormally high current draw.
Over-discharge Protection - Monitors battery charge capacity and cuts power to protect battery cells.
Over heat protection - Extreme heat damages ALL batteries. If the battery reaches a certain level of heat it will cut power to the tool.
Up 66% more run time than BL1830*
4-Stage battery fuel indicator
45 minute charge time
Specifications:
Voltage 18V
Dimensions LxWxH 11 x 8 x 6.5 cm
Weight 0.63 Kg

You recently viewed

Clear recently viewed