Makita 18V 3 Piece Combo DK0102X1

by Makita
$819.00
SKU DK0102X1

Makita 18V 3 Piece Combo DK0102X1
Makita 18v Auto Feed Screw Gun DFR450ZX
Features:
Makita built 4-pole motor design with dual steel ball bearings provides maximum torque
Increased rotational speed - 4,000 rpm ensuring smooth screw driving
Tool-less stopper base adjustment
New silent clutch - features high durability with direct drive transmission in reverse rotation
Reversing switch - carriage can be removed/installed without tool for bit replacement
Rigid aluminium casing
Specifications:
Voltage 18V
Capacity(Collated Drywall Screw) 4 mm x 25-40 mm
Max Output 235W
No Load Speed 4000 rpm
Length 424 mm
Weight 2.3 kg
Makita Cross Line Laser SK104Z
Features:
Self levelling - automatically levels the laser
vertical and horizontal alignment
Laser class 2
Protection class IP54 - protection from small amounts of water and dust ingress
Laser lock lever disables self levelling function and protects the laser during storage or travel
Specifications:
Battery 3x AA
Dimensions (LxWxH) 111x117x72mm
Levelling Accuracy 0.75mm
Range 15m
Self-Levelling Range 4 degrees
Weight 470g
Makita 18v Mobile Impact Driver DTD152Z
Features:
extreme Protection Technology (xPT) offers maximum protection against dust, debris and liquids for optimal performance in extreme conditions
NEW Battery Protection System provides Over-Discharge, Temperature and Circuit Protection for enhanced performance, battery cycle life and overall battery life
Increased max. torque of 1,460 in. lbs.
One-touch bit holder enables quick and easy bit installation
Twin LED lights with pre-glow and after-glow functions
Glow in the dark rubber bumper
Improved ergonomic soft rubber grip design for vibration absorption and comfortable operation features re-contoured rear grip portion and ribbed grip for improved hold
Specifications:
Battery Capacities 18V Li-Ion
Hex Shank 1/4 Hex
No Load Speed 0 - 2,900 RPM
Impacts Per Minute 0 - 3,500 IPM
Maximum Fastening Torque 1,460 in. lbs (165 Nm)
Vibration Level 10.5 m/s²
Noise Level 93 dB(A)
Overall Length 5-3/8" (137 mm)
Net Weight 2.0 lbs (0.9 kg)
Makita 5.0Ah Lithium Battery with Charge Indicator BL1850B-L
Features:
Star Protection
Battery Fuel Gauge
Multi-contact slide type terminal
Protective gel coating
Active 3 Controls current, voltage and thermal temperature
Shock absorbing construction
The fastest charge times in the industry
Intelligent battery & charger communication system
Protective gel coating - Sensitive electronics are protected with a thick gel coating, preventing damage against dust & moisture.
Shock absorbing construction - Battery cells are protected in an internal bumper case with foam pads at the base to protect against shock.
Multi-contact slide terminal - Ensures stable contact with the tool even under extreme vibration.
Overload Protection - The battery and tool communicate, protecting your tool and battery from overload by cutting power when put under abnormally high current draw.
Over-discharge Protection - Monitors battery charge capacity and cuts power to protect battery cells.
Over heat protection - Extreme heat damages ALL batteries. If the battery reaches a certain level of heat it will cut power to the tool.
Up 66% more run time than BL1830*
4-Stage battery fuel indicator
45 minute charge time
Specifications:
Voltage 18V
Dimensions LxWxH 11 x 8 x 6.5 cm
Weight 0.63 Kg
Makita DC18RC Active 3 Li-Ion Charger
Features:
Fast charging - charges Li-Ion 3.0Ah battery in only 22 minutes
Built-in CPU - gathers information from the battery's memory chip to determine optimum charging method
Forced air cooling fan - cools the battery to minimise charging time
Digital power display identifies the condition of the battery and charging condition
Specifications:
Cell Capacity 1.5-5.0 Ah
Charge Time 15 mins (1.5 Ah) 22 mins (3.0 Ah) 36 mins (4.0 Ah) 45 mins (5.0 Ah)
Net Weight 820 g
Overall Length 185 mm
Voltage 18 V

You recently viewed

Clear recently viewed